Dataprobe iBoot-Hub Quick Start Bedienungsanleitung PDF herunterladen

Quick Start Guide

What’s Included

 iBoot-Hub Unit

 Power Input Cable for North America

 Power Outlet Cable for North America

 Network Cable

 Quick Start Guide

Available Online at

dataprobe.com/support_iboot.html

 Complete Product Manual

 iBoot Setup Utility

 iBoot Control Program

 Additional Utilities and Programming Tools

To get all the benefits of your iBoot, register it: dataprobe.com/product-registration.html

 Notification of Updates

 Expedited Warranty Service

 Exclusive Offers

 Advanced End-of-Life Notification

Connections

1. Connect Network. iBoot supports 10/100

Ethernet using unshielded twisted pair (Cat

5) cabling. Two network jacks, with built-in

Ethernet switch, are provided. They are

auto-sensing for 10/100 and

Uplink/Downlink. A Link LED for each jack

indicates when the connection to the

network is properly established.

2. Connect Powered Device. Connect the

device to be powered ON and OFF to the

IEC receptacle marked A/C Outlet. An IEC-

320 to North American (NEMA 5-15) power

cord is included for connecting the iBoot

outlet to the device to be controlled. For

devices with IEC power connectors (fig 2B)

substitute an IEC-C13 to ICE-C14 Cord. For

countries with other power connectors,

substitute a suitable cord. These additional

cords are not supplied.

If the device has a power switch, turn it on,

to allow iBoot to control the power.

Make sure that the combined load of all controlled

devices does not exceed 12 Amps for 105-125VAC

or 10 Amps for 210-240VAC.

3. Connect Power Mains Connect the supplied

power cord to the connector labeled AC

Input, and the other end to your AC source.

If a power cord with a different terminating

plug is required, be sure it is properly rated

and meets all the required local electrical

standards.

1 2

Inhaltsverzeichnis

Seite 1 - Quick Start Guide

Quick Start Guide What’s Included  iBoot-Hub Unit  Power Input Cable for North America  Power Outlet Cable for North America  Network

Seite 2 - Power Control

Web Browser Access Factory Default IP Address: 192.168.1.254 (or set by DHCP) Factory Default Password: PASS iBoot supports DHCP. If your

Kommentare zu diesen Handbüchern

Keine Kommentare

Dataprobe iBoot-Hub Quick Start Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung Dataprobe iBoot-Hub Quick Start herunter. Dataprobe iBoot-Hub Quick Start User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Dataprobe iBoot-Hub Quick Start