Dataprobe iPIO-2 Quick Start Bedienungsanleitung PDF herunterladen

What’s Included

 iPIO-xx Unit

 Network Cable

 Quick Start Guide

 A/C Power Supply

Available Online at

dataprobe.com/support

 Complete Product Manual

 Device Management Utility

 Latest Firmware

 Software Developer Tools

Connections

1. Connect Network. iPIO supports 10/100 Ethernet using the cable supplied, or other suitable unshielded twisted pair (Cat

5) cabling. When power is connected to the iPIO, the green Activity LEDs on the network connector indicates when the

network connection is properly established.

2. Connect Inputs. (2 Connections per Channel)

Connect the inputs to the iPIO using the screw terminals.

Inputs can be either dry relay or switch contacts, or a +VDC

voltage (3 to 30 V), referenced to a common ground.

Screw terminals are removable for easy installation.

Terminals for each circuit are marked + and G. When

connecting dry relay contacts, the polarity is not significant.

3. Connect Relays. (3 Connections per Channel)

Relays are Form C. Connect to the Common (C),

Normally Closed (NC) and Normally Open (NO) as

marked. When the iPIO-8 relay is in the Open Condition,

the Common is connected to the Normally Open. In the

Closed state, the Common and Normally Closed are

connected.

4. Connect Power. Each unit is supplied with a n A/C

Power supply. Connect to suitable A/C source, then

power up the iPIO device. The iPIO-2 supports Power

over Ethernet (PoE). Consult the complete manual for more details.

Quick Start Guide

The iPIO is Factory set for Dry

Contact Input Only.

Prior to Connecting +VDC, Jumpers

must be configured.

See full manual or contact Dataprobe

Technical Support.

Relay Specifications

Rating (resistive)

0.5 A 120 VAC or

1 A 24 VDC

Max Carrying Current

2 A

Max Switching Power

60 AV, 24 W

Max Switching Voltage

120 VAC/60 VDC

Max Switching Current

Life Expectancy

5 Million Operations Mech.

100K Oper. at rated load

1 2

Inhaltsverzeichnis

Seite 1 - Quick Start Guide

Seite 2 - Changing the IP Address

Web Browser Access Factory Default IP Address: 192.168.1.254 Factory Default Security Credentials: Role Username Password Administrator admin a

Verwandte Modelle: iPIO-8 Quick Start | iPIO-16 Quick Start |

Kommentare zu diesen Handbüchern

Keine Kommentare

Dataprobe iPIO-2 Quick Start Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung Dataprobe iPIO-2 Quick Start herunter. Dataprobe iPIO-2 Quick Start User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: iPIO-8 Quick Start | iPIO-16 Quick Start |

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Dataprobe iPIO-2 Quick Start