Dataprobe PowerPal Single Bedienungsanleitung PDF herunterladen

11 Park Place / Paramus, New Jersey 07652

TEL: 201-967-9300 FAX: 201-967-9090

Website: www. dataprobe.com Email: [email protected]

Technical Support Hotline: (201) 967-8788

PowerPal uses a dial telephone line to remotely control A/C power. The user can turn power ON, OFF

or Power Cycle (Reboot) by entering DTMF digits using an ordinary tone dial phone. The phone line

connected to PAL can also be used by other equipment in a normal manner after control of power.

With one phone call, you can power up, down or reboot equipment then ring the telephone device

connected to PowerPal’s Extension port.

Pal works by listening for dialing tones (DTMF) after it answers a call. If these tones are heard, Pal will

respond with the current power status and allow additional tones to control the power. Once power

control is completed, the device on Pal’s Extension may (or may not) be rung.

Four call answering modes, security features and power control options make PowerPal both easy to

use and very flexible. An On/Off/Auto switch on PowerPal allows local manual control.

PAL

POWER

POWER PAL

Remote Power Controller

Version 2

A/C Source

Dial Line

Line Ext

Switched AC

Any Telephony Device:

Phone / Fax / Modem

Power Controlled Device

PAL

POWER

PowerPal

Functional Schematic

REF: PWR\POWERPAL-VER2_V980326W.DOC

1 2 3 4 5 6 ... 10 11

Inhaltsverzeichnis

Seite 1 - Functional Schematic

11 Park Place / Paramus, New Jersey 07652TEL: 201-967-9300 FAX: 201-967-9090Website: www. dataprobe.com Email: [email protected]

Seite 2 - IMPORTANT SAFETY INSTRUCTIONS

POWER PAL Page 10 Notes for Canadian InstallationsCertification Number: 1794 7467 A Load Number: 6The Canadian Department of Communications

Seite 3 - CALL ANSWER MODES

POWER PAL Page 11TECHNICAL SUPPORT, RETURNS AND WARRANTYDataprobe Technical Support is available 8:30AM to 5:30PM ET to assist you in the installation

Seite 4 - EXTENSION RING

POWER PAL Page 2IMPORTANT SAFETY INSTRUCTIONSWhen using this product, basic safety precautions should always be followed to reduce the risk of fire, e

Seite 5 - PROGRAMMING

POWER PAL Page 3POWER COMMAND SEQUENCEA call placed to PAL is answered in one of four ways. In all cases, Pal answers the call and listens for a powe

Seite 6

POWER PAL Page 4POWER CONTROLThe A/C power is controlled by a few simple codes sent to Pal. In all cases, Pal responds with tones to confirmcommands

Seite 7 - Power and Extension Secure

POWER PAL Page 5SECURITYAdditional security can be added to Pal’s power control and extension ringing features. With security enabled, asecurity code

Seite 8 - GENERAL SPECIFICATIONS

POWER PAL Page 6Answer Mode6 1 ∗Normal Answer Mode ß Factory Setting6 2 ∗Answer and Prompt6 3 ∗Answer and Quiet6 4 ∗Answer and Dial

Seite 9 - FCC REGISTRATION INFORMATION

POWER PAL Page 7PROGRAMMING SUMMARYFeature Code OptionsEnter Programming Mode # # Responds with two BeepsAnswer Mode6 n ∗1= Normal Answer (ring ba

Seite 10 - POWER PAL Page 10

POWER PAL Page 8Extension DeviceConnect any device that would normally be used on the telephone line to PowerPal’s modular jack marked EXT.(Pulse phon

Seite 11 - WARRANTY

POWER PAL Page 9FCC REGISTRATION INFORMATIONPower Pal FCC registration number: DNMUSA23923-OT-N REN: 0.4BThis equipment complies with Part

Kommentare zu diesen Handbüchern

Keine Kommentare

Dataprobe PowerPal Single Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung Dataprobe PowerPal Single herunter. Dataprobe PowerPal Single User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Dataprobe PowerPal Single