Dataprobe iBoot-G2 Spezifikationen PDF herunterladen (Seite 7)

V140506E iBoot-G2+ Page 7

Connection for physical switch for power control

Connection to the I/O connector for power control uses pins 2 and 3 as shown in the connection diagram. The

function of the switch is determined by the setup. See sect 7.2

Connection to General Purpose I/O

Function

iBoot-G2+

Description

Power

V+ Power Out

This is +12 VDC power out

from the iBoot-G2+

Maximum current 100 mA

Feedback

I Input

Input for status signals. Dry

Contact input or Open

Collector.

Ground

G Ground

Signal Ground for Input and

Output

Command

O Output

2N3904 NPN Transistor. 100

mA Maximum

4.4. USB Connection

The iBoot-G2+ has a USB connection that can be used for:

 Connection to a PC for setup and control

 Connection to a PC for heartbeat monitoring

To use the USB port, install the USB driver. Download the driver at http://dataprobe.com/support/iboot.html

USB Driver Installation

 Run ibootG2Driver.exe prior to connecting the iBoot-G2+ to the USB port of the PC.

 Connect the USB iBoot-G2+ to a USB port of the PC.

 The PC will discover the iBoot-G2+ and assign a COM port. To find the COM port go to

 Control Panel > System > Device Manager > Ports (COM & LPT) The com port assigned will be USB

Serial Port (COMn)

The USB port can now be used with a standard Terminal Client (like HyperTerminal) to communicate directly

with the iBoot-G2+. Dataprobe also provides a simple terminal program (EZ Term) at

http://dataprobe.com/support/iboot.html

Input Connections to Switches for

Power Control

Schematic of Input and Output Connections

Used as General Purpose I/O

1 2 3 4 5 6 7 8 9 10 11 12 ... 36 37

Kommentare zu diesen Handbüchern

Keine Kommentare

Dataprobe iBoot-G2 Spezifikationen Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Netzwerk-Switches Dataprobe iBoot-G2